총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 6. 30. 작업
Do pistons keep moving when the car stops?
The answer to your question is both yes and no. Yes in majority of the conventional vehicles, the pistons keeps moving even when the vehicles is at a stop light. The idle RPM, which is usually between 600RPM to 1000RPM, signifies the speed of the crankshaft. The fuel is calculated by the ECU (or ECM or PCM) depending upon the load, which is a calculated based on readings from Mass Air Flow sensor, Manifold Absolute Pressure sensor, Intake Air Temperature sensor and Throttle Position Sensor. Nowadays there is start-stop technology implemented in vehicles (commonly found in hybrid technology) and I have also heard of conventional vehicles having this feature. Basically engine shuts off when the vehicle is not moving to save fuel and as soon as the driver touches the throttle pedal, depending upon the load demand (aka throttle position etc.) fuel and spark timing is calculated by the computer and combustion begins to keep the vehicle transition smooth.
출처
이 사례는 Stack Exchange에서 수집한 데이터입니다.
신뢰도 2.5점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗차량 정보 없음
Hello! I have not driven my car for a month and now have this noise. It is a 2016 V Jetta and normally in great shape. The noise is in the background and sounds like something soft is rubbing against something. It picks up at 10 mi/hr or so and then stays on…Thank you! https://global.discourse-cdn.com/cartalk/original/3X/3/f/3f6ae6628ea80cf8d6b1899d0b2392d868545516.mp3
차량 정보 없음
i looked in my hood and noticed this serpentine belt. does it need replacement? it’s not making any squeeking noises car runs fine for being about 16 years old. IMG_4074 1920×2560 686 KB
닛산 알티마
Power seat - Whenever vehicle is started or shut off and the seat slides forward of back, the power seat makes an annoying, obnoxious noise… I thought something was stuck in the track but now I think it’s the motor going out. Guy at the local dealership said it just needed grease. He appears to be incorrect. Any thoughts? Thoughts?
차량 정보 없음
A buddy and I were trying to replace his right front wheel hub, on his 2008 Chevy Impala LTZ. He described the engine size as 3900, I would think that means 3.9 liter, although I didn’t know there is a 3.9, I only know of the 3.8 liter and 3,1 Liter. One of the mounting bolts is so tight that the socket would not keep a grip on the bolt head, no matter how hard we tried to force the socket onto the bolt head. We had tapped on it as best we could with a hammer and metal rod, we heated the area with a torch, no luck. Of course, very little access to this bolt head, so impossible to use an impact