혼다 어코드 수리 사례

Spinakerr said: n3 said: Great thread, and lovely to see one being kept on the road. I think OP got very lucky with his, to have so little rust on 183K miles. Mine was doomed by corrosion in the bulkhead at just 75K miles, which was strange to see as the 166 really was much better rustproofed than the 156-platform cars, and had if I recall correctly an aluminium subframe at the front too.Oh that was a Ti as well - very nice. What was your experience with the ride quality and tyre noise/tramlining? Mine was in knackered condition and I wanted teledials visually, it has made a huge difference.

I couldn't find one. I could only find the sad face pre-FL ones in Minerva green. Many years ago on Alfaowner there was an FL 3.2 manual with the Q2 or Quaiffe LSD in the same colour as this Ti for around £4K, but that was a long time ago. Taking a look on Alfaowner today it seems there was some discussion about whether UK market 166 Tis (plural) should have a Ti badge on the centre console with even brochures not agreeing on it. Unless it's a cheap RFL Giulietta or Mito I think it's improbable I'll own an Alfa now.

혼다 N-BOX 커스텀(JF3/4) | 시프트레버 가공 | 공정1: 구조 확인용으로 저렴하게 구입한 시프트레버 | 공정2: 이전과 동일하게 커팅 시트를 부착했습니다 | 공정3: 경년 열화로 변색되어 이번에 교환합니다

혼다 시빅 타입R 유로(FN2) - 포그라이트 및 번호판 홀 스무딩 part1 - 공정1: FN2의 면을 보면 포그라이트가 신경 쓰이는데, 시커에서 막는 것들이 튀어나와 있고 덕트 같은 것도 할 수 있지만, 좀 심심하지 않나? 이 글에서 사용한 필요한 물품들을 적어둡니다. - 발포우레탄 - 톱 같은 것 - 퍼티(가능한 크기가 큰 것, 많이 사용됨) - 사포(240번 사용) - 버프(없어도 되지만, 귀찮으면 필요) - 공정2: 그래서 BTCC…