토요타 캠리 수리 사례
2018년식 · ACV70 (2017-현재) · 2.5 자동
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 1. 작업
난이도 & 준비물
증상
WHEN I FIRST BOUGHT MY CAR IN AUGUST 2018 WHEN I FIRST DROVE IT... THE ACCELERATION WAS ON POINT. NOW IT SEEMS LIKE WHEN I GO TO TAKE OFF TO ACCELERATE IT FEELS SLUGGISH AS IF IT'S DOING THE WAY IT ORIGINALLY DID.
출처
이 사례는 NHTSA (미국)에서 수집한 데이터입니다.
신뢰도 2.8점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗토요타 캠리 다른 정비 사례
THE CAR JERKS WHEN I DO NOT ACCELERATE, WHILE MAKING A TURN, AFTER STOPPIJNG AT A RED LIGHT OR A STOP SIGN.
Hi everyone, I’m looking for some advice on a specific shifting issue with my 2007 Toyota Auris 1.4 D4D (Manual). I cannot shift from 4th gear into 3rd gear while the car is moving. It feels like hitting a physical wall, no grinding or noise, just a total lockout. Upshifting is fine 2nd to 3rd gear works perfectly. Also others gears no problem at all. From 1st to 5th to reverse. I can select 3rd gear easily when the car is stopped. The car recently sat in snow/freezing temperatures for 5 days. There is no “crunching” or grinding sound. And it was suddenly no prior symptoms. I moved my car afte
Steering wheel is becoming harder and harder to turn right or left
WHEN ACCELERATING FROM DEAD STOP IN A RIGHT HAND TURN UP-HILL CAR IS SLOW TO MOVE FORWARD REQUIRING MORE PRESSURE ON GAS PEDAL, THEN TRANSMISSION SEEMS TO BE HUNTING FOR RIGHT GEAR CAUSING A JERKY MOTION.
다른 차종의 정기점검 사례
차량 정보 없음
Hello! I have not driven my car for a month and now have this noise. It is a 2016 V Jetta and normally in great shape. The noise is in the background and sounds like something soft is rubbing against something. It picks up at 10 mi/hr or so and then stays on…Thank you! https://global.discourse-cdn.com/cartalk/original/3X/3/f/3f6ae6628ea80cf8d6b1899d0b2392d868545516.mp3
차량 정보 없음
i looked in my hood and noticed this serpentine belt. does it need replacement? it’s not making any squeeking noises car runs fine for being about 16 years old. IMG_4074 1920×2560 686 KB
닛산 알티마
Power seat - Whenever vehicle is started or shut off and the seat slides forward of back, the power seat makes an annoying, obnoxious noise… I thought something was stuck in the track but now I think it’s the motor going out. Guy at the local dealership said it just needed grease. He appears to be incorrect. Any thoughts? Thoughts?
차량 정보 없음
A buddy and I were trying to replace his right front wheel hub, on his 2008 Chevy Impala LTZ. He described the engine size as 3900, I would think that means 3.9 liter, although I didn’t know there is a 3.9, I only know of the 3.8 liter and 3,1 Liter. One of the mounting bolts is so tight that the socket would not keep a grip on the bolt head, no matter how hard we tried to force the socket onto the bolt head. We had tapped on it as best we could with a hammer and metal rod, we heated the area with a torch, no luck. Of course, very little access to this bolt head, so impossible to use an impact