토요타 캠리 수리 사례
2018년식 · ACV70 (2017-현재) · 2.5 자동
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 1. 작업
난이도 & 준비물
증상
Steering wheel is becoming harder and harder to turn right or left
출처
이 사례는 NHTSA (미국)에서 수집한 데이터입니다.
신뢰도 2.8점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗토요타 캠리 다른 정비 사례
THE CAR JERKS WHEN I DO NOT ACCELERATE, WHILE MAKING A TURN, AFTER STOPPIJNG AT A RED LIGHT OR A STOP SIGN.
Hi everyone, I’m looking for some advice on a specific shifting issue with my 2007 Toyota Auris 1.4 D4D (Manual). I cannot shift from 4th gear into 3rd gear while the car is moving. It feels like hitting a physical wall, no grinding or noise, just a total lockout. Upshifting is fine 2nd to 3rd gear works perfectly. Also others gears no problem at all. From 1st to 5th to reverse. I can select 3rd gear easily when the car is stopped. The car recently sat in snow/freezing temperatures for 5 days. There is no “crunching” or grinding sound. And it was suddenly no prior symptoms. I moved my car afte
My 2007 Toyota Camry has a 2.4l engine 4 cylinders and it’s at about 197,000 miles. I’ve been going crazy trying to figure out while the engine is vibrating horribly when at a red light and it’s a lot worse with the ac on. I’ve changed motor mounts, checked evap purge valve, cleaned maf sensor, cleaned throttle body, bought an aftermarket pcv valve from advanced auto parts, I even bought a smoke machine from Amazon and smoke tested the evap system and found a easy leak after the maf senso rand sealed it but that didn’t do much. I’m not sure if it matters since it’s before the maf sensor but th
WHEN ACCELERATING FROM DEAD STOP IN A RIGHT HAND TURN UP-HILL CAR IS SLOW TO MOVE FORWARD REQUIRING MORE PRESSURE ON GAS PEDAL, THEN TRANSMISSION SEEMS TO BE HUNTING FOR RIGHT GEAR CAUSING A JERKY MOTION.
다른 차종의 쇼크업소버 교환 사례
차량 정보 없음
Does anyone here have experience with Front Steering and Suspension kits for older cars? [1] I’m helping a friend get a 1966 Mustang he inherited back up and running. The body is in nice condition. He’s looking at it as something to drive around locally, and not as a daily driver or for long trips. We got it running and it’s now registered. His front suspension is sloppy and loose, and has more steering play than it should, (even after tightening the steering box adj screw). The car is 1.5 hrs away from me, and we’re doing the work on his garage floor. We work on the car about twice a year. He
차량 정보 없음
Hi, friends. Anyone know which of the two hoses on the power steering reservoir is the return line? I need to change the fluid in my 94 Camry with the 2.2 l. Alternatively, is there an easy way to differentiate between return and suction?
차량 정보 없음
Any chance someone can tell me what’s going wrong here. I’m used a titan 3/16 double flaring tool and nicopp. It keeps giving me this weird stepped flare. I’m not sure what to call this issue so I didn’t know what to look up. I’m doing my best to get a square cut, then I chamfer the outside with a file and chamfer the inside with a utility knife until there’s no burrs. I’m sort of worried that the screwing motion of the tool is messing with it somehow and instead I need a press tool. What’s weird is I did get one sort of good flare but couldn’t replicate it. It’s also made a few good flares us
BMW 5시리즈
Seems like I need to replace the struts and shocks on my 2013 528i xDrive. The shop quoted me a rather large sum for parts and labor, which led me to wonder if I can do this as a DIY project. I have some questions about it that I’m hoping someone on here can answer: When I search for replacement parts and specify my exact vehicle, I don’t seem to get many or any results, depending on the site. But when I drop the xDrive specification and search for just “2013 528i” struts and shocks I get what appears to be a few decent choices. Do both these cars in fact use the same type of shocks and struts