
6세대 (2017-현재) · 2.0i
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 21. 작업
GreatScott2016 said: Don t get me wrong, I wouldn t have one, but the hate for this one slightly surprises me. It s better looking than 90% of modern SUVs out there imho. Anyway, VED is a killer which ever way you cut it .just dont pay it....
cerb4.5lee said: Cryssys said: Never knew that these existed. Now that I do I wish that I didn't.23 mpg, £790 VED, 0-60 in 10 secs, ugly as sin and god knows what for insurance.Who in their right mind is going to fall for that?Stevie Wonder perhaps? A cracking write up as always Mr Shed thanks. I actually don't mind the interior in this to be fair. I half considered one of these about 10 years ago as a cheap tow car for the horse trailer - Large NA engine with torque convertor (good towing, no turbo, EGR, DPF to go wrong) - Not bothered about fuel economy as would do high annual mileage - Lots of room in the back for saddles, rugs, haynets and everything else needed - Comfy interior - Cheap as ugly, undesirable - Wouldn't need to worry about it becoming a literal shed with all the mud, hay, hair etc from the horses as a) cheap, b) ugly In the end we did the sensible thing and got a Hilux with a truckman top (but I'd have a 4.0l V6 Hilux in a heartbeat if I could get one to avoid diesel ! )
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗스바루 레가시 B4(BL) - 엔진오일 교환(190,675km) - 1단계: 교환 거리 도달로 인한 교환
스바루 포레스터(SK) | 커튼 분할 하네스 장착 작업 | 공정1: 커튼 분할 하네스 장착을 시작했습니다. 다른 분들의 리뷰를 참고하여 작업 진행. 위치를 찾기가 쉽지 않았지만 무사히 장착 완료했습니다. | 공정2: 스티어링 근처, 퓨즈박스 옆쪽 부근에 핑크 테이프가 있습니다. 상당히 몸을 날려야만 찾을 수 있었습니다. | 공정3: 핑크 테이프를 제거하니 나타났습니다😊 | 공정4: 숨겨져 있던 커넥터에 커튼 분할 하네스를 연결! 손이 들어가기 힘들어 애먹었습니다. | 공정5: 무사히 연결 완료했습니다. | 공정6: 추가 설명입니다♪
スバル レヴォーグ(VN)|洗車13回目へ🍁|工程1:1ヶ月以上、サボっちゃいましたが久しぶり洗車行ってきました。数日後には☔予報ですが・・|工程2:最後はCCウォーターゴールドで念入りに拭き取って完了~🎵 |工程3:ただ1年経つのでさすがに小傷が出初めてきました・・😅 があまり気にせず、3連休の間でも久々のテカテカ愛車とドライブを満喫したいと思います🤗
스바루 임프레자 스포츠(GT) 휠 도장 - 건메탈릭 도장 작업 중 문제 발생. 외장 검정화에 맞춰 실버 휠을 건메탈릭으로 도장하려고 함. 16인치 휠의 겨울타이어를 소프트99 휠 칼러 건메탈릭으로 도장 시도. 세척→접지(발취)→마스킹→프라이머→건메탈릭 도장→우레탄 클리어 도장 순서로 시공. 메탈릭 도장이 어렵고, 구입한 스프레이 4캔 모두 도료가 균등하게 분사되지 않는 문제 발생.
재규어 XE
Love it
차량 정보 없음
윈드스크린 상단 잠금실린더에서 누유 발생. 실린더 재조립 후 유압액 충전했으나, 리어 데크리드가 열리는 지점까지 작동하다가 펌프가 힘들어하며 윙윙거리는 소음 발생.
차량 정보 없음
18,000km 전에 P0430으로 촉매 교체 후, MIL 꺼짐. 영구 코드: P0175 뱅크2 리치, P219B A/F 비율 실린더 밸런스, P0430 촉매 뱅크2. 새 A/F 센서 설치 후 코드 클리어. 시운전 중 뱅크2에서 연료 트림이 매우 음수로 나타남.
포르쉐 카이엔
kambites said: It's nice apart from the wheels. The 15/16 staggered setup on the original car was about perfect, IMO. The later 16/17 was OK too. This looks ridiculous. Agreed. A few years ago I saw Porsche 992 racers on 18", which looked ridiculous.So I asked why?Because they drive so much better on 18" sir.OK, I'll have a JAS Tensei NSX on 18" please...