실제 자동차 수리 사례 3,139건
BMW 5시리즈
G30 (2017-현재) · 520d
braddo said: This is absolutely outstanding Is this kind of modding and fabrication part of the day job? You make it sound like the hardest bits were finding front brakes and de-chroming it I would have kept chrome for the kidney grills and window surrounds but that's by the by - this car is effing brilliant. Rear tyres are the same as a 997 GT3 and those Conti 7s were very impressive on a couple of track days so I think they'll hang on very well, vastly better than performance tyres of the 90s/00s. There's always Cup2s or Hoosiers Im self employed, I build Cummins engines for bus companie
혼다 어코드
CR3 (2022-현재) · 1.5T AWD
혼다 악티 트랙(HA8/9) | 타이어 조환·밸런스 조정 | 공정1: 타이어 트레드가 감소했기 때문에 타이어를 조환했습니다. 사용하던 타이어는 요코하마 SUPER DIGGER II Y828입니다. | 공정2: 약 6년 사용했습니다. 열화와 슬립 사인까지 가까워졌습니다. | 공정3: 조환 후의 타이어입니다. 농경지에 진입하거나 논둑 등 농작업에 사용하기 위해 이번에는 토요 타이어 OPEN COUNTRY R/T로 교체했습니다. 기존 타이어는 사이드 패턴이...
차량 정보 없음
Best value even if it's top money, is the LS400, if it's as good s it looks. One could daily that for years to come. Just keep it serviced, keep an eye on tyre and brake wear and the odd suspension ball joint.
미니 쿠퍼
J01 (2023-현재) · E 일렉트릭
브레이크 페달 느낌이 매우 안 좋음. 강력한 브레이크 성능에도 불구하고 페달 반응이 부드럽지 않음. 연구 결과 시스템 내 에어가 원인일 가능성 높음.
닷지 챌린저
2012년식 · 3세대 (2008-2023) · R/T 5.7 HEMI
스로틀 바디 경고등이 간헐적으로 깜박임. 문제 발생 시 크랭킹이 길어지고, 유휴 회전수가 변동하며, CKP(크랭크축 위치센서), 오일 압력, 스로틀 바디의 기준 전압이 2.7V로 표시됨. 인테이크 분해하여 하네스 확인했으나 이상 없음. 오일 센더(송유관) 및 크랭크 센서(도지) 교체함.
혼다 시빅
2016년식 · FB 9세대 (2012-2016) · 1.8 LX
간헐적으로 스티어링이 뻣뻣함. 엔진이 상단에서 마운트로 지지되어 있어 크레들을 제거하지 않고도 랙에 접근 가능.
차량 정보 없음
mac96 said: Odd logic I know , but as tractors are generally low speed vehicles I will put this here.At this time of year my area is infested with tractors and trailers, as apart from their off road function they seem to have replaced trucks for a lot of road journeys. Now I don't really have a problem with the slow speed - it is what it is. Other peoples refusal to overtake is another matter!Paradoxically it is their refusal to slow from 30mph where appropriate- say in a 20mph speed limit in a village with narrow roads and pavements. They are driving a vehicle which is heavy, has no crash pr
차량 정보 없음
nickfrog said: njw1 said: nickfrog said: ^ sounds good to me if that helps prevent absurdly noisy exhausts or bypass emission mitigation. We have collectively made a rod for our own back by taking the mickey.One of the cars listed in your garage has one of the loudest cold starts I've ever heard!True and it's annoying. It only lasts a few seconds however and it's a surprisingly quiet car in Comfort which is the only mode I would use in town.When I traded my 2018 M3 for the Alpine the dealer commented that it was the loudest car on their plot and by a country mile. A definite boom as it star
재규어 XE
X760 (2015-현재) · 2.0T AWD 자동
Those who know me, know that I am not renowned for my reckless spending and therefore this has come as much as a surprise to me as anyone else.Last week I was quite happily living with my old e46 330, occasionally pondering what I might replace it with, but never seriously (I have had it for 6 years).Last Wednesday I got a phone call from a very stressed out wife, who had a tyre going flat on her Evoque. It turns out that the actual valve had broken and of course this is is attached to the TPMS. A quick call to our local specialist and we are on our way with said wheel.Wheel handed over and we
재규어 XE
X760 (2015-현재) · 2.0T AWD 자동
Those who know me, know that I am not renowned for my reckless spending and therefore this has come as much as a surprise to me as anyone else.Last week I was quite happily living with my old e46 330, occasionally pondering what I might replace it with, but never seriously (I have had it for 6 years).Last Wednesday I got a phone call from a very stressed out wife, who had a tyre going flat on her Evoque. It turns out that the actual valve had broken and of course this is is attached to the TPMS. A quick call to our local specialist and we are on our way with said wheel.Wheel handed over and we
차량 정보 없음
Mr Tidy said: POIDH said: I worked with a few folk who owned various hot hatches in late 1980s. One morning a wee train of a 205 1.6Gti, Mk Golf GTI (I think 16v), XR2 and a Capri laser (cannot remember what engine) set off to do the length of Ullswater from where we lived to our work site.All I remember was 1. giggling the whole way to work in passenger seat of the 205 and 2. three cars arrived together, the Capri a good few hundred metres back. Apparently he could not keep up with the cornering speed of the other three...Now it may be a tyres thing, but I always wondered if it was just st
재규어 XE
X760 (2015-현재) · 2.0T AWD 자동
아내의 Evoque에서 타이어가 펑크 났는데, TPMS가 부착된 밸브 자체가 손상되었음. 또한 구매 예정 차량(E46 330)의 최근 MOT 기록에서 여러 항목 발견: 운전석 후측 위치등 다중 광원 중 1/2 이상 작동 불가, 언더트레이 미고정, 엔진 소음/덜거덕거림, 양쪽 뒷타이어 손상/균열/경화, 운전석 앞타이어 손상/균열/경화, 전면 브레이크 디스크 마모/핏팅/스코어링, 리어 서브프레임 마운팅 영역 부식, 헤드램프 워셔 누유, 보행자 시스템 경고등 오류
BMW 5시리즈
G30 (2017-현재) · 520d
The ArtfulBodger said: mjspencer348 said: SS427 Camaro said: Purosangue said: if memory serves weren't the last 280 capris and specials fitted with Good year Eagle NCTs i think 205, 60 , 15s normal 2.8i were on 13 rimsI recall Jackie Stewart in an advert for the first 2.8i, back in 81 which was also about its tires, which were Good Year NCTs.Didnt the Brooklands come on Pirrellis ? This worth a watch.https://www.youtube.com/watch?v=TwJ779hvjbsJackie Stewart on Track in a car that doesn't handle!Chris Serle doing the RAC with Roger Clarkthanks
차량 정보 없음
cerb4.5lee said: I was impressed regarding the fuel thing in the Caterham to be honest, granted I only did 40 miles(and I was driving it hard at times), but the fuel gauge didn't hardly move! So I'm definitely not use to that at all in comparison to a lot of other cars that I've had over the years for example. So it just shows how much of a benefit light weight is in terms of that I think. Yep, makes a huge difference on cars with no regen capability being driven with lots of acceleration and braking - the amount of petrol you have to burn to get up to speed increases in proportion to the mas
볼보 V60
Z (2018-현재) · B4 자동
Beco90 said: What are the differences between an 850 and a 960? I couldn t work it out then and I still can t work it out now? Is it the same as a V60 vs V90 now? The physical dimensions and spec of an 850 and 960 always seem the same to me!Entirely different cars. 850 was front drive and a ground up new design, the 960 was rear drive and based on the already old 760.But a lot of visual similarity.
차량 정보 없음
라디오 수리 완료. 트렁크 내부 청소 중 폼 교체 필요 발견. 쿨링 시스템 여러 곳에서 누수 발생 - 주로 호스 연결부에서 발생.
차량 정보 없음
So this is a new addition to the garage. It is the Roadsport model with the 1.8 K-series engine with 140bhp and the optional LSD. It has only done 4500 miles since 2002, so it needs a little bit of recommissioning and the tyres are from 2001 for example. So once I've sorted a few bits and bobs on it, I will be able to start enjoying it. I'm excited about it because I've never had a performance car that has been lighter than 1100kg, so it is definitely something a fair bit different to what I'm used to. Here is a pic of me collecting it, and a couple of it in the garage too. I will update when
차량 정보 없음
So this is a new addition to the garage. It is the Roadsport model with the 1.8 K-series engine with 140bhp and the optional LSD. It has only done 4500 miles since 2002, so it needs a little bit of recommissioning and the tyres are from 2001 for example. So once I've sorted a few bits and bobs on it, I will be able to start enjoying it. I'm excited about it because I've never had a performance car that has been lighter than 1100kg, so it is definitely something a fair bit different to what I'm used to. Here is a pic of me collecting it, and a couple of it in the garage too. I will update when
차량 정보 없음
So this is a new addition to the garage. It is the Roadsport model with the 1.8 K-series engine with 140bhp and the optional LSD. It has only done 4500 miles since 2002, so it needs a little bit of recommissioning and the tyres are from 2001 for example. So once I've sorted a few bits and bobs on it, I will be able to start enjoying it. I'm excited about it because I've never had a performance car that has been lighter than 1100kg, so it is definitely something a fair bit different to what I'm used to. Here is a pic of me collecting it, and a couple of it in the garage too. I will update when
아우디 A4
B9 (2015-현재) · 35 TFSI
I think, in general, gaining access to an EV tariff combined with shifting domestic loads to off-peak periods will lower, not raise, the cost of the electricity to run the house. Our weighted average price is 22.2p / kWh with a 47p standing charge - obviously if most of our consumption is in the daytime we'll end up paying more, and if we shift it to off-peak by setting timers on the dishwasher and laundry, we'll pay less.Looking at the last bill, our actual average rate was 18.12p/kWh.Edited by otolith on Monday 7th September 18:51
닛산 알티마
L34 (2018-현재) · 2.5 자동
닛산 스테이지아(M35) | ATF 교환 ② | 공정1: 어제 70km 주행 후 2차 교환 이번에 3.8L 배출되어 해당량 보충✌️ | 공정2: 1차와 2차 비교, 상당히 붉어짐 | 공정3: 겸사겸사 트랜스퍼도 교환. 1.8L 보충 | 공정4: 그리고 리어 디프도! 이쪽은 1.4L, 뉴텍 NC-70 사용 | 공정5: 트랜스퍼 정비서 | 공정6: 리어 디프 정비서
BMW M3
G80 (2021-현재) · 3.0T 자동 RWD
cerb4.5lee said: I don't think they need to get enthusiasts onboard to be honest either as you say, because they'll sell enough cars to the folk that aren't all that bothered about cars anyway I think. Not in the spirit of the thread title but agree entirely.
혼다 어코드
CR3 (2022-현재) · 1.5T AWD
혼다 N-BOX 커스텀(JF1/2) | 12개월 점검 완료 | 과정1: 전 소유자의 정비 내역을 알 수 없어서 평소 거래하는 딜러에서 철저히 12개월 점검을 받았습니다. 얼마 전에 ATF는 이미 교환한 것 같아서 이번에는 오일 교환 및 기타 신경 쓰이는 부분을 꼼꼼히 점검받았습니다. 사이드 슬립도 조정받아 주행이 한결 편해졌습니다. 정비사 ○○님, 항상 감사합니다.
차량 정보 없음
Thank you all, encourages me to try and write up the rest Jon_Bmw said: Excellent thread and clearly a talented problem solver.For reference, you are correct about the exhausts being inconel (most likely 625) on the area you were working in (the c80mm dia. pipes). Its crap to cut, crap to weld, and even crapper to weld to stainless. The only advice I can give is that best practise to join inconel 625 and Stainless is to use an Inconel 625 filler rod. Not that many people have that lying around though. You did as good a job as someone who is not a thin wall inconel welder could have expected t