BMW
냉각수 교환P0128

BMW 3시리즈 수리 사례

2013년식 · F30 (2011-2018) · 328i

총 비용

370,000원

공임

140,000원

부품비

230,000원

소요 시간

180분

2026. 4. 18. 작업

난이도 & 준비물

난이도 쉬움⏱ 예상 30~60🔧 잭스탠드

증상

냉각수 온도 이상 상승, 공회전 시 팬 과도 작동, 냉각수 소모

진단

P0128 코드. 서모스탯 고착 (열림 방향). 냉각수 호스 상부 균열로 소량 누수. 냉각수 색 변색 (갈색).

처리 내용

전자식 서모스탯 교환, 냉각수 상·하부 호스 교환, 냉각수 전량 교환 (BMW 쿨란트 8L).

M

MechanicHub 데이터베이스

프로필 →

이 정비사에게 직접 문의하기

로그인하면 연락처를 확인할 수 있어요

로그인 후 보기

다른 차종의 냉각수 교환 사례

쉐보레

쉐보레 말리부

Temperature Guage doesn’t work, fan on motor runs, air conditioner doesn’t work when this happens and message says, “steering assist reduced, drive with caution.” Replaced temperature coolant sensor, still having problem.

차량 정보 없음

I am trying to troubleshoot a 4runner with 135k miles, auto, 3.4 V6 California emissions. This is the freeze data: PID Description Value Units 0x02 Freeze frame DTC P0420 - 0x03 Fuel system status Closed-loop, using oxygen sensor feedback to determine fuel mix - 0x04 Calculated load value 34.12 % 0x05 Engine coolant temperature 197.6 F 0x06 Short term fuel % trim - Bank 1 0.78 % 0x07 Long term fuel % trim - Bank 1 3.91 % 0x0C Engine RPM 2287 RPM 0x0D Vehicle speed 68.97 MPH 0x0F Intake air temperature 95 F So far the front and back Ox sensor was replaced and the MAF cleaned to clear a P0171 co

포드

포드 익스플로러

Been a long day. Im not good at putting pictures on here. So ill try again. This is on my 89 year old moms ford explorer.its a 2012 she bought new. 3.5 engine. All work has been done at the local Ford dealer. 75k miles. I looked it over and decided to check the air filters and a few other things. I noticed the coolant looks pink, it should be orange. She has ever receipt from the dealer service. Its never had any work done involving coolant. Just tire rotation and oil changes. Sad to say she’s never even had them change the air filters. So im wondering why does the coolant look pink? 20260102_

현대

현대 소나타

Coworker has a 2008 Hyundai Accent, which has overheated repeatedly, consumes a lot of coolant, and barely runs. He wants me to assist with repairing the engine, if possible. I assume by now, the head is warped or cracked, but what I am trying to determine is if the engine block in this model is iron or aluminum. If it’s iron, this can probably be repaired. If it’s aluminum, the entire engine would need to be replaced, which is more work than I would want to do.