J01 (2023-현재) · E 일렉트릭
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 15. 작업
Maxym said: 2xChevrons said: Citroen Traction Avant.The first mass-produced implementation of:Unitary construction Front-wheel driveRack and pinion steeringand also hadOHV engineFully hydraulic brakesIndependent front suspension At a time when such things were still unusual, especially on a mid-market mass-produced car. And it certainly was the first time all these features had been brought together in a single design. It set standards in roadholding and ride quality that some peers didn't match for another 40 years. Later in production it also pioneered:Radial tyresThe first hatchback (Argu
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗미니 MINI(F55/56) | 후드래치(보닛 개폐 레버) 교체 필요 | 과정1: 국제우편 배송 | 과정2: 개봉 | 과정3: 장착 전 준비 | 과정4: 액셀페달 우측에 레버 위치, 빨간 원 안에 토르스 나사 있음 | 과정5: 실제 나사 T20 | 과정6: 기존 드라이버 사용 | 과정7: 나사 제거 상태 | 과정8: 분리된 정품 레버 | 과정9: 동봉된 와셔를 사진의 면(카운터싱크 측)과 반대편에 위치시키면서 나사를 각인면부터 구멍에 삽입 | 과정10: 와셔 확인용
cerb4.5lee said: Deep Thought said: said: this thread is now just people wanging on about how great their ICE cars are/were and of cause mr mitty popping up every now and then.meanwhile, the world is going electric. bar the states temporarily.Yup.Definitely, but as the saying goes, you don't know what you've got until you lose it though for me. Electric is ticking along nicely, and that won't change, but it's also nice to look back though I think. Absolutely. but that should maybe be separate thread. Or two actually.Celebration of current ICE cars perhaps? And One for the fantasists to
tallpaul26 said: Thank you for this public service announcement. I've filed it firmly under 'jobs never to attempt myself!'Actually wasn't that bad.One of those jobs that took ages because I was trying to do it without taking something else off, i.e. the brake servo.Once I'd decided to remove the servo, it took 20 minutes, whereas I'd spent an hour and 20minutes trying to do it without removing the servo, although admittedly, given the current status of the car, removing the servo was much easier than it would of been had I had to drain the brake fluid and if there had been an engine in the w
MDifficult said: Resist the temptation on the lights MDifficult said: For the cig smells, try a good wet vac and then a load of baking soda sprinkled everywhere (once it’s dry) then dry vac. It’s amazing what it’ll pull out! Thanks, I'll give it a go. rickygolf83 said: Nice work, i am currently removing the subframe and tank on my R53.... replacing everything front to back, with all the parts sitting waiting to go I'm doing the same, although I'm buying the parts as I go along, which may delay things a bit.rickygolf83 said: Did you watch Hyphens R53 resto on youtube by chance? He was us
차량 정보 없음
2005 Toyota Tacoma 4x4에 265/65-17 타이어용 체인을 설치했는데, 체인이 타이어 안쪽 서스펜션 부품(스티어링 조인트 등)과 위험할 정도로 가까워 보임. 체인 설치 후 건조한 상태에서 확인했을 때 체인이 서스펜션과 간섭할 우려가 있음.
차량 정보 없음
2010 르노 메간 1.5 dci - 드레인에 충돌하여 좌측 ECU 및 전기부품 수몰. ECU, 서스펜션 좌측 상단 퓨즈박스, 글러브박스 옆 퓨즈박스, 카드리더, 스티어링 칼럼 전기박스 교체 완료. 점화는 되고 크랭킹되지만 시동이 안 걸림.
미쓰비시 아웃랜더
Japdays (2026) / Modifierade strålkastare med LCD display :) / Japfest Holland (2026) / Japfest Holland (2026) / Testar nya coilovers :) / Tomei Extreme titanium avgassystem :D! / Japfest Holland (2025) / Rasad växellåda så fick bli ny låda och 2 skivig koppling :) (2024) / Ambilight installerad (2024) / Custom tour (2024) / Genomgång och lackering av front/huv. (2024) / Japdays (2023)
마쯔다 마쯔다3
2008 Mazda 3 에어컨이 냉각 안 됨. 겨울 후 봄에 접어들면서 문제 발생. AC 켰을 때 클러치 회전 확인됨, 꺼졌을 때 멈춤. 분쇄음 없음. 저압 포트에서 냉매 게이지 확인 결과 레드존(고압 상태)을 나타냄. 냉매 병입 시도했으나 이미 고압 상태.