총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 1. 작업
2003 Chevrolet Avalanche 브레이크 라인 파손. 새 라인으로 교체하고 브레이크액을 충전한 후 약 1시간 동안 에어 빼기를 했으나 여전히 페달이 바닥까지 내려감. 압력을 해제할 때마다 서비스 엔진 라이트(Brake Service Light) 점등.
마스터 실린더를 벤치 블리딩(Bench Bleeding)하십시오: 라인을 제거하고 짧은 라인을 연결하여 저수조로 돌아가게 한 후 기포가 나오지 않을 때까지 펌프질합니다. ABS를 벤치 블리딩하십시오: 마스터 실린더와 동일한 방법으로 진행합니다. 에어 빼기 시 올바른 절차를 따르십시오: 블리더 밸브를 열고 페달을 내린 후 블리더를 닫고 페달을 뗍니다. 이를 반복하면 에어가 갇히는 것을 방지할 수 있습니다. 진공 블리딩(Vacuum Bleeding) 방법을 시도해보십시오: 블리더에 진공을 적용하여 유체를 밀어냅니다. 표준 펌프 블리딩과 가압 블리딩보다 더 효과적일 수 있습니다. 마스터 실린더 상단의 밀봉 상태를 확인하고, 각 휠의 블리더를 순서대로 확인하십시오.
출처
이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗BMW M5
Lovely ready and I love your choice!! The E60 was one of the best M5s I ever had - On road and track Use it, and enjoy every moment of the magnificent engine!! I did more track days in my E60 than all my other cars in the past combined I would hazard a guess at. So many fond memories. My advice, put a decent set of brakes on it, I ended up with 12 Piston Calipers and 400mm rotas with all the track days I did and it really transformed it and the confidence it gave to the car.
차량 정보 없음
I'm very observant when driving or walking, the other day I walked my son to school alongside a busy road, I reckon 80% of the cars that passed me were looking down at phones. I had a van pull out on me on a roundabout a few months ago and then slam his brakes on, phone clearly visible so I submitted the footage to TVP and to my surprise they sent me a letter confirming a prosecution. The amount of times I've had to swerve recently because of cars swerving onto my side of the road is diabolical.
볼보 XC60
I think it is a shame to lose one of the distinctive features of the 944 (the wrap around rear screen).Proportions from rear three-quarters are also a bit too Scimitar for my taste but each to their own.
포르쉐 카이엔
Love shooting brakes where the change doesn't detract from the original or adds something like the Z3 "clowns shoe"or this:but a thought, they've modified the " chassis"or monocoque, so i this ry would it have to go through IVA