총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 14. 작업
Seeing as it went to the PH annual service yesterday, I figured it was about time a thread was started to cover my ownership.Full history on background etc. coming soon but suffice to say it was a boyhood poster car that I never thought I'd have chance to own. Turns out dreams can come true.Oh and before anyone suggests it, yes Clarkson and that clip had a hand, but so did Guy Martin... IYKYK Anyway, the car in questionIt's a fairly subtle spec:- 2014 (Built in July 2013) Aston Martin Vantage V12S- #21 built- 7 Speed Sportshift III- Quantum Silver exterior- Obsidian black leather seats, with s
Thanks both.With regards to the surrounding of VWs, that was at a Cars & Coffee event at Type2 Detectives in Cambridgeshire. They kindly did the mechanicals/fit out on my brothers '65 split screen bus and have since opened up a coffee shop with regular meets. Worth a visit if you're ever passing.With regards to plans for the Aston, read on... So back to the beginning. I actually purchased it back in November last year. I was between jobs at the time but was due to start the next one couple of weeks later, given I had time on my hands I was doing the usual browsing of Car & Classic as you do it when afflicted and it happened to throw this one up. After double-checking myself a few times given it was in budget and looked to be a good spec with a few choice options, I called and arranged to see the car. Fortuitously I was travelling south that week to see the folks so a diversion the other way around the M25 was no real hardship On arrival and my first sighting of the car was that it was thankfully undercoverI spent a good two hours going over things, which as to be expected wasn't completely perfect given it had covered just over 58,000 miles... oh yes, this thing has been used.Bad points:- Heavy condensation in both rear lamps- Headlights looked like they'd been cleaned with a scotch pad- A few minor stone chips on the front bumper- Front splitter had a possible crack in the centre, but it was also fully covered over by a 'carbon effect' wrap, for protection or to hold it together, who knows.- Tyres had reasonable tread but the rears were probably down to c4mm- Mesh grill had a few rust spots/marks- Lower 'start' section of the key insert had fallen out- Only one key, thankfully it was the crystal one but it had had a life- Engine bay was a little untidy/dusty- Small crack on the waterfall dash behind the nav screen- Door rubbers looked tired and cracked in a few places- Front right alloy had a couple of minor curb marks- Two of the brake bleed nipples were rusty and
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗차량 정보 없음
1992 쉐보레 루미나 3.1 - 시동이 매우 거칠고 스로틀을 밟아야 시동이 걸림. 기어 상태에서 스터터링 현상 발생(거의 꺼질 뻔함). 최근 연료펌프, 연료필터, 썬모스탯 교체했음에도 개선 미흡.
스바루 임프레자
2019 Subaru Impreza에서 간헐적으로 RPM이 2000까지 올라가지만 가속이나 감속 시 반응하지 않음. 예: 75mph까지 가속 후 50mph에서 급제동했을 때도 RPM이 움직이지 않음. 주행 중 일시적으로 정상화되었다가 다시 발생함.
포드 머스탱
포드 피에스타. 아침 첫 시동 시에는 정상 작동하며 기어 변속이 매끄럽습니다. 약 15분 운전 후 기어 변속이 서서히 뻣뻣해지고, 30분 후에는 기어 변속 시 더 많은 힘을 필요로 합니다. 차량을 멈추고 냉각시키면 기어 변속이 다시 정상으로 돌아오며 이 현상이 반복됩니다. 클러치는 최근 교체했으며 정상으로 보입니다. 기어유는 양호합니다.
렉서스 ES
2JZ-GTE 엔진(600bhp)에 장착 가능한 6단 수동변속기 옵션 찾음. Magna PT V160 외 대안 검토 중. IS300 적합성 필요(터널 수정 가능). 여러 번 재구성 없이 고출력 견딜 수 있는 변속기 필요.