토요타 캠리 수리 사례
ACV70 (2017-현재) · 2.5 자동
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 1. 작업
난이도 & 준비물
증상
I have a 97 Toyota Camry LE 3.0 with 160k miles that has had intermittent starting problems for over a year now. Sometimes the car will start first try no problem and other times I can try it 10 times and it will just crank although it will eventually start. When the car starts everything runs perfectly fine until last week when I was going about 45 and the car suddenly stalled, I started pulling over to the side of the road and before I even got on the shoulder rpm’s jumped back up and the car ran perfectly fine the rest of the day. The next day it did the same thing except the rpm’s never ju
처리 내용
A failing crankshaft position sensor can cause what you describe. 1aauto.com Bad Crankshaft Position Sensor Symptoms & Problems Problems with the crankshaft sensor will often present as problems with engine timing. If you think your sensor has failed, here are some common symptoms of a bad crankshaft sensor that can help you in determining whether or not it has failed. Tester
출처
이 사례는 CarTalk (미국)에서 수집한 데이터입니다.
신뢰도 2.5점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗토요타 캠리 다른 정비 사례
THE CAR JERKS WHEN I DO NOT ACCELERATE, WHILE MAKING A TURN, AFTER STOPPIJNG AT A RED LIGHT OR A STOP SIGN.
Hi everyone, I’m looking for some advice on a specific shifting issue with my 2007 Toyota Auris 1.4 D4D (Manual). I cannot shift from 4th gear into 3rd gear while the car is moving. It feels like hitting a physical wall, no grinding or noise, just a total lockout. Upshifting is fine 2nd to 3rd gear works perfectly. Also others gears no problem at all. From 1st to 5th to reverse. I can select 3rd gear easily when the car is stopped. The car recently sat in snow/freezing temperatures for 5 days. There is no “crunching” or grinding sound. And it was suddenly no prior symptoms. I moved my car afte
Steering wheel is becoming harder and harder to turn right or left
WHEN ACCELERATING FROM DEAD STOP IN A RIGHT HAND TURN UP-HILL CAR IS SLOW TO MOVE FORWARD REQUIRING MORE PRESSURE ON GAS PEDAL, THEN TRANSMISSION SEEMS TO BE HUNTING FOR RIGHT GEAR CAUSING A JERKY MOTION.
다른 차종의 정기점검 사례
차량 정보 없음
Hello! I have not driven my car for a month and now have this noise. It is a 2016 V Jetta and normally in great shape. The noise is in the background and sounds like something soft is rubbing against something. It picks up at 10 mi/hr or so and then stays on…Thank you! https://global.discourse-cdn.com/cartalk/original/3X/3/f/3f6ae6628ea80cf8d6b1899d0b2392d868545516.mp3
차량 정보 없음
i looked in my hood and noticed this serpentine belt. does it need replacement? it’s not making any squeeking noises car runs fine for being about 16 years old. IMG_4074 1920×2560 686 KB
닛산 알티마
Power seat - Whenever vehicle is started or shut off and the seat slides forward of back, the power seat makes an annoying, obnoxious noise… I thought something was stuck in the track but now I think it’s the motor going out. Guy at the local dealership said it just needed grease. He appears to be incorrect. Any thoughts? Thoughts?
차량 정보 없음
A buddy and I were trying to replace his right front wheel hub, on his 2008 Chevy Impala LTZ. He described the engine size as 3900, I would think that means 3.9 liter, although I didn’t know there is a 3.9, I only know of the 3.8 liter and 3,1 Liter. One of the mounting bolts is so tight that the socket would not keep a grip on the bolt head, no matter how hard we tried to force the socket onto the bolt head. We had tapped on it as best we could with a hammer and metal rod, we heated the area with a torch, no luck. Of course, very little access to this bolt head, so impossible to use an impact