쇼크업소버 교환 수리 사례
총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 7. 1. 작업
난이도 & 준비물
증상
Before going off to college, I had my car carefully inspected by a trusted mechanic whom I asked to inform me of any major problems. That is to say, the car has none now. However, I just noticed (don't ask how I didn't notice before) that whenever I turn at a low speed, such as maneuvering in parking lots, there is a bit of squealing. Everything works perfectly, and the squealing isn't hideously loud-- it's just loud enough. What might cause this, and how can I fix it?
처리 내용
Is the noise coming from the steering itself, or from the tyres? i.e does it make the noise as you are turning the steering wheel, or does it still do it as you hold the wheel steady during the turn? If it is the latter (the "hollywood tyre squeal" effect), that is quite common, particularly on the smooth concrete you tend to find in multi-story car parks. If it only occurs as you are physically turning the wheel, i would suspect an issue with your power steering - have you checked the fluid level recently?
출처
이 사례는 Stack Exchange (미국)에서 수집한 데이터입니다.
신뢰도 2.8점(참고용) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗다른 차종의 쇼크업소버 교환 사례
차량 정보 없음
Hi, friends. Anyone know which of the two hoses on the power steering reservoir is the return line? I need to change the fluid in my 94 Camry with the 2.2 l. Alternatively, is there an easy way to differentiate between return and suction?
토요타 캠리
Steering wheel is becoming harder and harder to turn right or left
차량 정보 없음
Any chance someone can tell me what’s going wrong here. I’m used a titan 3/16 double flaring tool and nicopp. It keeps giving me this weird stepped flare. I’m not sure what to call this issue so I didn’t know what to look up. I’m doing my best to get a square cut, then I chamfer the outside with a file and chamfer the inside with a utility knife until there’s no burrs. I’m sort of worried that the screwing motion of the tool is messing with it somehow and instead I need a press tool. What’s weird is I did get one sort of good flare but couldn’t replicate it. It’s also made a few good flares us
차량 정보 없음
Does anyone here have experience with Front Steering and Suspension kits for older cars? [1] I’m helping a friend get a 1966 Mustang he inherited back up and running. The body is in nice condition. He’s looking at it as something to drive around locally, and not as a daily driver or for long trips. We got it running and it’s now registered. His front suspension is sloppy and loose, and has more steering play than it should, (even after tightening the steering box adj screw). The car is 1.5 hrs away from me, and we’re doing the work on his garage floor. We work on the car about twice a year. He