총 비용
-
공임
-
부품비
-
소요 시간
-
2026. 8. 24. 작업
Toyed with doing this for ages! Hope you like it. Here goes... Before getting to my current cars, I always love the threads where people share their car history, so here's mine! Unfortunately I don't have pictures for all of them so I've pointed out where I've shamelessly borrowed from Google image search. Where possible the images are exactly as my cars were. So, first up...Nissan Micra K10 1.0 | 1985 | 50 BHP | 79 BHP per Ton | 0-60 in 13.6Image from GoogleHanded down from my older sister, this was my first car. Ghastly thing but made a change from all my peers who either drove Mk2 Fiestas o
A few updates. Managed to find a few pictures of more of my old cars so I've updated the images in the opening post to replace the Google ones. Can't own cars like this and not use them properly so this morning I joined a bunch of other PH-ers for the first run-out of the year. Wet roads, muddy tracks and more than few piles of cow sh*t left the car looking pretty well used by the time I got home... The downside to a bluff backside and no rear wash wipe is a rear window you can see out of for about 5 minutes! Liberal coating of crud all over. Thankfully, a good previous base coat of wax, a foam lance and 10 minutes with the Karcher and all's back to normal...Really enjoyed the run-out - perfect for the Mini really with tight a twisty stuff followed by flowing A and B roads. I think I've also perfected the right heal & toe down-change technique to really set the exhaust popping & banging on the overrun Never known a car that can move from verge to centreline and back quite so quickly on the throttle, especially when you've one hand changing gear but I guess I just need to learn to grip the steering wheel harder!Only downside so far... the little faux vents on the side skirts appear to only serve one purpose... collecting cow sh*t and stones!
출처
이 사례는 PistonHeads에서 수집한 데이터입니다.
신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.
원문 보기 ↗차량 정보 없음
차량 주행거리 168,517km. 상단부에서 태핑음이 발생하며 스커핑/칩핑 소음과 가끔씩 둔한 충돌음/쿵쿠덕거리는 소음이 동반됨. 4번 실린더에서 발견...
차량 정보 없음
엔진이 0초에서 시동되고 363rpm에서 유지됨. MAP 28, BARO 28, 부스트 14.3. 스모크 테스트 결과 누유 없음. 무엇이 문제인지 파악 필요.
차량 정보 없음
3번 실린더의 밸브 시트가 떨어져서 발생한 미스파이어. 헤드와 실린더 손상. 교체 작업 진행 중 - 국제(International) OEM 신규 실린더 및 1개 실린더 키트 교체 시작했으나 미완료
차량 정보 없음
2009 Ford Edge 3.5 SEL - 엔진을 고회전시킬 때 거친 쉬익거리는 소음 발생