Stack Exchangeโ˜… ์‹ ๋ขฐ๋„ 2.5 (์ฐธ๊ณ ์šฉ)

์ˆ˜๋ฆฌ ์‚ฌ๋ก€

์ด ๋น„์šฉ

-

๊ณต์ž„

-

๋ถ€ํ’ˆ๋น„

-

์†Œ์š” ์‹œ๊ฐ„

-

2026. 6. 30. ์ž‘์—…

์ฆ์ƒ

Is it safe to reuse oil that was drained for a repair?

์ฒ˜๋ฆฌ ๋‚ด์šฉ

As @dodgethesteamroller stated, there is nothing wrong with reusing the engine oil. There are two caveats and one concern I'd like to mention with this. First, use a clean container to store the oil in while you are doing your engine work. Your normal engine drain pan will probably not give you the cleanliness you are looking for. You DO NOT want to have the dirt and crud which collects in the pan to be put into your engine. Second, it's probably a good idea to change out the oil filter when you are doing this. It doesn't hurt anything and should only cost you a few dollars to replace. Concern: Before you decide you are going to reuse your nearly new engine oil, you need to realize the reasons for doing the work on the engine in the first place. If you are replacing worn bearings, you don't want to reuse your engine oil no matter how new it is, because it will more than likely have metal fragments from the old bearings in it ... no sense in putting metal particles back into your engine

์ถœ์ฒ˜

์ด ์‚ฌ๋ก€๋Š” Stack Exchange์—์„œ ์ˆ˜์ง‘ํ•œ ๋ฐ์ดํ„ฐ์ž…๋‹ˆ๋‹ค.

์‹ ๋ขฐ๋„ 2.5์ (์ฐธ๊ณ ์šฉ) โ€” ์ถœ์ฒ˜ ์†Œ์Šค์˜ ์ „๋ฌธ์„ฑ/๊ฒ€์ฆ๊ตฌ์กฐ๋ฅผ ๊ธฐ์ค€์œผ๋กœ ์‚ฐ์ •๋œ ์ ์ˆ˜์ด๋ฉฐ, ์ •ํ™•์„ฑ์„ ๋ณด์žฅํ•˜์ง€ ์•Š์Šต๋‹ˆ๋‹ค.

์›๋ฌธ ๋ณด๊ธฐ โ†—
๋ฏธ๋ถ„๋ฅ˜ ์ˆ˜๋ฆฌ ์‚ฌ๋ก€ | MechanicHub