쇼크업소버 교환PistonHeads★ 신뢰도 4.1 (높음)

쇼크업소버 교환 수리 사례

총 비용

-

공임

-

부품비

-

소요 시간

-

2026. 8. 7. 작업

난이도 & 준비물

난이도 보통⏱ 예상 120~240🔧 리프트🔧 특수공구

증상

I think I’d rather have a 12C… better looking and with the trick suspension. Strangely one thing which has always impressed me in McLarens are the column stalks. Beautifully made and very satisfying to use.

처리 내용

K7hyd said: I suppose the 540 vs the 570 argument is a bit like the turbo vs turbo S debate. But if the 570 is only a few grand more, why on earth wouldn t you go for the faster and presumably better equipped model?I remember talking to a McLaren dealer a few months before the 540s / 570s appeared. He told me that they were coming and told me the power vs price for each - and I was sure that the 540 would be more than fast enough for the money.In the used market though, I am surprised that the 540 prices stay so close to the 570s - not because they're significantly less of a car (they're obviously not) - but because they're so close, I'd assume most people would simply choose the 570 and I'd expect that to force 540 prices down. Doesn't seem to though.

출처

이 사례는 PistonHeads에서 수집한 데이터입니다.

신뢰도 4.1점(높음) — 출처 소스의 전문성/검증구조를 기준으로 산정된 점수이며, 정확성을 보장하지 않습니다.

원문 보기 ↗

다른 차종의 쇼크업소버 교환 사례

미쓰비시 아웃랜더

Japdays (2026) / Modifierade strålkastare med LCD display :) / Japfest Holland (2026) / Japfest Holland (2026) / Testar nya coilovers :) / Tomei Extreme titanium avgassystem :D! / Japfest Holland (2025) / Rasad växellåda så fick bli ny låda och 2 skivig koppling :) (2024) / Ambilight installerad (2024) / Custom tour (2024) / Genomgång och lackering av front/huv. (2024) / Japdays (2023)

혼다

혼다 시빅

2008 Civic EX 5단 자동변속기 - 에어 서스펜션과 파워 스티어링 유체, 엔진오일 정비 후 리버스와 드라이브 기어에서 정차 상태일 때 프론트 엔드에서 심한 진동 발생. 파크와 뉴트럴에서는 진동 없음. 정비 2일 전에는 증상 없었음. 변속기 자체는 건드리지 않음.

마쯔다

마쯔다 마쯔다3

2008 Mazda 3 에어컨이 냉각 안 됨. 겨울 후 봄에 접어들면서 문제 발생. AC 켰을 때 클러치 회전 확인됨, 꺼졌을 때 멈춤. 분쇄음 없음. 저압 포트에서 냉매 게이지 확인 결과 레드존(고압 상태)을 나타냄. 냉매 병입 시도했으나 이미 고압 상태.

차량 정보 없음

마스터 실린더(M/C) 블리딩 시 페달을 눌렀다 놨을 때 유체 흐름의 작동 원리 이해 부족. 페달을 누르면 피스톤이 우측으로 이동하여 흡입 포트를 차단하고, 휠 실린더 블리더를 열면 M/C 피스톤 캐비티(스프링이 있는 부분)가 압축되어 블리더를 통해 유체가 배출됨. 블리더를 닫고 페달을 놓으면 피스톤이 좌측으로 복귀하려 하는데, 피스톤 캐비티가 확장하려면 리저버에서 새로운 유체가 공급되어야 하는 메커니즘이 불명확함.