수리 사례

2026. 6. 30. 작업

증상

How to inexpensively replace missing baffles on a classic bike

처리 내용

You have a few possibilities Get used off Ebay. I always see those stock pipes on there. You can drill a hole through the side of your current junk pipe and rivet the baffle in place as long or short term temporary solution. You will need to get a rivet gun and rivets to get this done. You can repack your baffles , as you suggested, and then use the rivet gun. As an aside, tin cans are good for gerry rigging exhaust. They can take heat better than aluminum cans. You can drill out a tin can and jam into your exhaust and rivet it into place as a temp solution. If you don't know much about tuning your carburetors, don't do this one as it will mess up your mixture. You can use pieces of a tin can in riveting your baffle and what not too. Have one handy if your going to gerry rig it.